Residential water problems are common occurrences today than it used to be years back. One of the contributing factors that lead to these problems in modern faucets is the internal design. Another reason that might lead to this problem is the conservation measures being undertaken for natural resources. People are also faced with diminishing water volume in their faucets.
Back then, standard bath, shower, and kitchen faucets had plastic and rubber washers coupled with a circular valve seat in the interior of the faucet. When the faucet would be opened, the washer would disengage from the valve seat and thus water would have a large pathway in which to flow through. With these old designs, large amounts of water would flow through the faucet. However, with the limited supplies of fresh water and an ever increasing population, it was bound to change.
Most of the faucets manufactured today have cartridges that do not have a washer inside. The old washer design is replaced with the modern cartridge for controlling water. The space left for water to flow is much smaller as compared to the old designs. On top of this, most of the current faucets come with an aerator which is fitted at the end. Water must pass through this aerator which is made of tiny holes. According to kitchen faucet reviews online this issue is being fixed in newer models of faucets and the leaders in the industry are trying hard to create faucets that safe water.
In order to meet water conservation measures and guidelines that have been set by the federal government and states, most of the modern faucets have flow restrictors. These are meant to control the water amount going through the faucet at any time. The restrictors also have tiny holes meant for reducing the amount of water passing through.
The drop in water pressure or volume might be caused by small pieces of debris that clogs the passageway within the cartridge. This is a common occurrence with many homeowners. The sediments can be created by hard water problems. People who use private wells might also be having this problem due to transportation of small pieces of rocks or sand.
Low water flow and pressure problems are mostly observed after a water main break in the municipal water supply system. When a water main fractures, dirt, sand, or other debris might enter the municipal piping system. When the pipe has been repaired, this debris can then be carried by the water and might end up in the domestic water system.
It does not require huge costs to rectify the issue. The first approach would be to check the aerators in the faucet that is having flow problems. The aerator should be carefully removed taking close consideration of the assembling of the various parts. All parts should not have debris and the passageway should be clear. The parts can also be soaked overnight in warm, white vinegar in order to remove the deposits of hard water that might have stuck in the system.
If the water volume and pressure remain low even after the aerator has been checked, then there are high chances that the valve cartridge is the problem. The cartridge can be carefully removed after reading and following the manufacturer’s manual that came with the unit. The manufacturer’s website will also provide more information regarding the assembling of the cartridge.
A good way of preventing sediments from finding their way to the faucets in the home is opening up a hose faucet on outside. As such, water will flow through them first when plumbing repair works have been completed in the home. These outside hose faucets still use the old technology of plastic or rubber washers. It is also advisable to remove the faucet aerators just before the water has been turned on after the plumbing repair works.
After plumbing repair has been done in the home, the main water valve should be turned on very slowly. When this is done, the pressure inside the piping system will build up slowly and most of the sediments will be carried outside. This will also minimize deposits being carried to the interior faucets.
The same procedure should also be followed when there is a water main break near the home and there is no water at home. All faucet aerators should also be removed. When the water has been repaired, it will be turned on without notifying the residents, and therefore any sediment should be carried to the outside faucets and not stick to the aerators.
Diminishing water volumes in modern times is a common problem. It might have been occasioned by the design of the faucets. However, sediments might clog the water passageway in the faucets which can also lead to the problem.
Latest posts by Adolf Saburo (see all)
- Australia: Protests Over Energy Costs, Workers Rights - December 2, 2015
- Human Rights Watch- a Closer Look at the Car Industry - November 30, 2015
- Everything You Need to Know About the Asian Pacific Action - November 12, 2015